LinkedIn Prospecting: A Step-by-Step Method From Profile to Verified Email

LinkedIn prospecting method in six steps: list, signals, connect, message, stop and add the verified email

Publish date: Nov 10, 2026

LinkedIn prospecting is the work of finding the people who could buy from you on LinkedIn, qualifying them and starting the conversation. The method below has six steps. Build a narrow list, let signals set the order, connect, send three messages at most, and add a verified email for those who never accept.

That last step matters more than it sounds. Across 13.2 million connection requests on Expandi's platform, 28.5% were accepted. Seven in ten prospects never see your first message.

A verified email is the way to them. Over four recent weeks, Spona's Targeted Search extension ran 207,990 lookups, and 97.7% of them returned a verified email. The full weekly figures, and what "verified" does and does not mean, are in the fifth section.

The Extractor
The Refiner
The Verifier
The Exporter

Get thousands of leads in 4 minutes.

Stop stitching tools together.
Start with verified sales data, delivered in minutes.

SCALE SALES NOW

No contracts · No setup · No onboarding

LinkedIn prospecting: the method in six steps

LinkedIn prospecting is the LinkedIn half of sales prospecting: find the buyer, check the fit and make the first contact from a profile page. What makes it repeatable is the order of work. Each step produces something the next one uses.

StepWhat you doLinkedIn featureWhat you end up with
1. Define the buyerWrite down the industry, size, country and the two or three roles that own the problemNone; this happens in your CRM or a sheetA one-page ideal customer profile
2. Build the listFilter accounts first, then the people inside themSales Navigator account and lead filters, saved listsA list of accounts with two or three named people each
3. Watch the signalsSort the list by what changed: a new role, a recent post, a warm pathSaved-search alerts, "Posted on LinkedIn", job-change signalsThis week's working list
4. ConnectSend the request in the prospect's morning, with a note only when you have something specific to sayConnection requestAccepted connections
5. Message, then stopOne opener and two follow-ups, then move onMessages, and InMail for people outside your networkReplies and booked calls
6. Add the verified emailLook up a verified work email from the profile and run the second channelA lookup tool such as Spona's Targeted SearchA contact you can still reach when LinkedIn goes quiet

Two numbers explain why the list comes before the message. Ehrenberg-Bass finds that up to 95% of business buyers are not in the market at any one time. Companies change a service provider, such as their bank or law firm, about once every five years. So most of your list is not buying this quarter, and the signals in step 3 decide who you contact first.

The second number is the reach gap. Take 100 requests at Expandi's 28.5% average. About 28 connect and about 72 do not. That is one automation vendor's average, not a law, and a tight list with a warm path does better.

The gap is still why step 6 exists. The people who never accept are not lost. They are an email list you have not built yet.

Grid of 100 LinkedIn connection requests: 28 accepted and 72 not, the gap the verified email step closes
Build the email step into the method from day one, because most requests never connect.

Prospecting on LinkedIn starts with a narrow list

The filters are only as good as the profile behind them. Write the ideal customer profile before the first search: industry, headcount band, country or territory, the roles that buy and the roles that block. A rep who skips this step builds a list of 2,000 names and works none of them properly.

Sales Navigator gives you more than 50 filters. Fifteen of them work on accounts and 36 on people. The account filters include headcount, revenue, department growth and job openings. The geography filter takes a territory, so a rep who covers the Pacific Northwest or the North of England searches that area and nothing else.

Filter accounts first, then people

LinkedIn's own guide to Sales Navigator sets out an account-first workflow, and it is the right order. Start with the account filters, save the search, and save the accounts that fit to a list. Then switch to the Lead view and limit the search to that account list. Add the role filter last.

Two filters earn their place at this stage. "Posted on LinkedIn" keeps only people who posted in the past 30 days, which points to people likely to see a message. The role filter picks the two or three people per account who own the problem, not the whole department. Save those leads, and Sales Navigator starts suggesting similar ones.

Keep the list small. A list of 150 accounts with three people each is 450 names, and that is a quarter of real work for one rep.

Save the search and let alerts work

A saved search is the cheapest prospecting you will do. Sales Navigator notifies you when a new account meets your criteria, so the list grows while you sell. Saved leads feed the lead suggestions the same way.

The filters above and the alerts are Sales Navigator features. With a free account you keep the list in your own sheet and check it by hand. That works for a short list and breaks past a few hundred names. The FAQ below covers what each plan costs.

Which LinkedIn signals say a prospect is ready now?

If up to 95% of your list is not in the market right now, the signals pick out the few who are. LinkedIn is rich in them, because people announce their own changes. Every minute, 110 members add a new role to their profile.

A job change is the strongest signal on the platform. A new head of sales often reviews the stack in the first quarter and may have the budget to change it.

Sales Navigator flags job changes among your saved leads, alongside other signals. They include who viewed your profile, who follows your company and which accounts show buyer intent. The intent signal sits on the Advanced and Advanced Plus plans only.

Recent posts are the second signal, and they are free to read. A prospect who posted about hiring, a migration or a missed target has handed you the first line of your message. Read the last three posts before you write anything. Comment on one if you have something to add, and never comment just to be seen.

Warm paths are the third. A warm path is a shared connection or a colleague who knows the account. LinkedIn's own data says sellers who find one get 2.7 times more accepted requests than those who do not. Ask for the introduction instead of sending the cold request.

Multi-threading is a signal you create. LinkedIn reports that sellers with four or more connections at a target account are 16% more likely to close a deal there. Both figures are LinkedIn's own and cover its paying users, so read them as direction rather than as a benchmark for your team. Signals outside LinkedIn, such as funding and hiring, are covered in the buying signals post.

LinkedIn messages that do not read as automation

The message step has one job: earn a reply from someone who did not ask to hear from you. On Expandi's platform, 10.4% of outbound messages get one. Length matters a little: the sweet spot in single-message campaigns was 151 to 200 characters. Those got replies from 8.5% of contacts, against a 6.8% baseline across all lengths.

The copy itself is in the LinkedIn cold message templates post, with a request, an opener and two follow-ups you can adapt. This section covers what the data says about when and how often to send.

One line on automation, because the question always comes up. In one six-month period, LinkedIn removed 68.3 million spam and scam items before any member reported them. It restricted 24.4 million fake accounts the same way.

A tool that sends requests and messages for you runs on the account you need most. The templates post weighs that trade-off in its automation section.

Connection requests: with a note or without

Expandi's data covers 13.2 million requests from 13,302 accounts over twelve months. Three findings carry over to any team:

  • The note rarely gets an answer. Only 3.0% of connection-request notes get a response. Add one when you can name the post, the role change or the shared connection. Otherwise send the bare request and save the words for the first message.
  • Morning beats evening. Requests sent between seven and 11am were accepted at about 32%. Evening requests managed 24%. Send in the prospect's morning, not yours.
  • Mind the weekly cap. LinkedIn caps the invitations an account can send each week, and the numbers you will read are vendor estimates. HeyReach puts it at up to 100 a week. Evaboot says 100 to 200. Withdraw requests that have sat unanswered for a month.

Follow-ups: three touches, then stop

The follow-up count is the one place the data gives a clear answer. Across 2,966 campaigns of 50 or more contacts, Expandi measured the reply rate by the number of messages in the sequence. One message got a reply from 6.3% of contacts. Three got 9.8%, and five or more fell to 5.0%.

Bar chart of LinkedIn reply rate by sequence length: 6.3% for one message, 9.8% for three, 5.0% for five or more
Stop after the second follow-up and move the silent prospect to the email channel.

Three touches means three messages, usually an opener and two follow-ups. In Expandi's campaigns that open with a connection request, the note counts as message 1. When the third touch gets no reply, stop messaging and move the person to step 6. Sequences of four or more messages got fewer replies in Expandi's data, which shows a link, not a cause.

InMail reaches people who have not accepted. Every Sales Navigator plan carries 50 InMail credits a month per license. LinkedIn credits one back when the recipient replies within 90 days, and a polite "no" counts as a reply. Spend them on the accounts with a signal, not on the whole list.

LinkedIn also says personalized InMails can lift acceptance rates by 40%. That is its own claim, and the page links it to a post about recruiter InMails. It still points the right way: name the signal in the first line.

From profile to verified email: what Spona's lookups returned

LinkedIn's plan page lists no email or phone data in any Sales Navigator plan. The Sales Navigator comparison post covers what the plans let you export. The usual fix is a lookup from the profile. Step 6 takes each person you could not reach, or want to reach on two channels, and attaches a verified work email.

Spona's Targeted Search is a Chrome extension that does this lookup. It returns a verified email, and a mobile number too when you ask for both fields. "Verified" means the address passed Spona's own check at the moment of the lookup. Nothing has been sent at that point, so it is not a promise about delivery.

Four recent weeks of Targeted Search lookups

Spona's product analytics for the extension cover four recent weeks and 207,990 lookups. A lookup is one query, not a unique person, so a profile looked up twice counts twice. Each lookup returns at most one email and one mobile result, and the two fields overlap, so the counts are never added together. Active users overlap from week to week and are never summed.

WeekSearches (n)Verified email results (n)Email success rateMobile results (n)Mobile success rateMedian latency (seconds)Active users (n)
148,37247,18497.54%43,91690.79%3.7417
252,79351,61897.77%48,23991.37%4.1463
349,68648,54297.70%45,28091.13%3.4439
457,13955,92997.88%51,94790.91%3.9497

Success rate is results divided by searches in the same week. It says how often a lookup came back with an address that passed Spona's check. Nothing was sent, so it is not an accuracy, deliverability or bounce figure.

Our own sums across the four weeks: 203,273 of 207,990 searches returned a verified email. That is 97.7%. The other 4,717 searches, 2.3%, returned none.

The fourth week ran 18% above the first. Within a week, active users averaged about 113 to 116 lookups each.

Where Targeted Search fits, and where it does not

Targeted Search charges 13 credits for a verified email and 88 for a mobile number. Both fields together cost 101 credits.

A credit costs $0.008 to $0.01 depending on the plan. An email therefore runs $0.104 to $0.13. The pair runs $0.81 to $1.01.

It fits a rep who works a Sales Navigator list and needs the second channel for the people who never accept. It fits a team that wants the address checked at lookup time rather than pulled from a stored file. And it fits anyone who would rather pay per lookup than per seat.

Where it does not fit:

  • It is not a LinkedIn tool. It sends no requests or messages, shows no signals and keeps no saved searches. Sales Navigator owns steps 2 to 5.
  • Credits expire. Unused credits, add-ons included, expire at the start of each billing period. Buy the plan for your monthly volume, not for a peak month.
  • One-off lookups cost less elsewhere. A tool with a free monthly allowance beats a paid plan for a handful of names. The LinkedIn email finder post sets out what each lookup tool charges.

The email you looked up comes with rules. In the US, CAN-SPAM makes no exception for business-to-business email. Every message needs a valid physical postal address and an opt-out you honor within 10 business days. Each email that breaks the rules can cost up to $53,088.

In the UK, the PECR email rule does not apply to corporate subscribers. A cold email to a named person at a limited company needs no PECR consent, but sole traders and some partnerships count as individuals. A named work email is personal data even when the person acts in a business capacity, and their right to object is absolute. Give a valid address for opt-outs and act on every one.

The Extractor
The Refiner
The Verifier
The Exporter

Get thousands of leads in 4 minutes.

Stop stitching tools together.
Start with verified sales data, delivered in minutes.

SCALE SALES NOW

No contracts · No setup · No onboarding

LinkedIn prospecting FAQ

Does LinkedIn prospecting still work?

Yes. LinkedIn prospecting works as the first channel of a two-channel sequence. On Expandi's platform, 28.5% of connection requests were accepted and 10.4% of messages got a reply. Those rates reward a narrow list and a signal-led order of work, and they punish volume. The verified email in step 6 reaches the people who never accept, and Spona's lookups returned one 97.7% of the time.

Do you need Sales Navigator for LinkedIn prospecting?

Not for a short list. The account filters, saved-search alerts and job-change signals above are Sales Navigator features, and they are what make steps 2 and 3 repeatable. Core costs US$119.99 a month or US$1,079.88 a year. Advanced costs US$159.99 a month, and the Sales Navigator pricing post compares the plans.

What is the 4-1-1 rule on LinkedIn?

A content mix, not an outreach rule. For every one post about yourself, share four new pieces of content and one re-share. Andrew Davis of Tippingpoint Labs and Joe Pulizzi coined it for social media. It serves prospecting in one way: a profile with recent, useful activity is easier to accept than a blank one.

How many people should you contact per account?

Two or three to start, more as the deal grows. LinkedIn says the average sales cycle has sellers engage up to 11 people at a target account. Four connections is the point where its data shows deals closing more often, as the signals section notes. Map the account before you add names, and the account mapping post shows how.

Share this article

GET FREE LEADSSparkle

Similar Topics For You

see all texts